combustible cladding

Flammable cladding costs could approach billions for building owners

Jun 7, 2019
  • Article by Online Contributor

Australian building owners face a bill that could run into billions of dollars to replace combustible cladding of the sort that fuelled the Grenfell Tower fire in the UK, which killed 72 people, as well as fires in Australia and overseas, write Simon Lockrey, senior lecturer/ research fellow, RMIT University and Trivess Moore, lecturer, RMIT University.

The cost estimate is based on our calculations for Victoria, which has had apartment building cladding fires in 2014 and 2019.

Nearly two years on from the Grenfell disaster, there is ongoing tension between policymakers, the building industry and owners about how to resolve the problem of combustible cladding. And little information is available about the scale of the issue for owners across Australia, particularly those living in apartments.

So what could the costs be? We looked at Victoria as a case study. Our modelling produced cost estimates of between AUS$250 million and AUS$1.6 billion. The ultimate figure will depend on the cost-efficiency of any rectification program and the risk level and size of the 629 buildings known to be affected – and many more could yet be identified.

How were costs estimated?

The 2018 Victorian Cladding Taskforce identified 354 low/moderate-risk buildings and 275 high/extreme-risk buildings in a statewide cladding audit update last October.

There is little data available on dwelling density for Victorian apartment building stock. Melbourne City Council (MCC) records show residential buildings with ten dwellings or more (medium-to-high-density buildings) have an average of 75 dwellings per building in the built-up municipality. Buildings of this density are known to be receiving notices from the Victorian government to act on cladding.

To model costs, we have also used real quotes owners have received to rectify their properties, as well as quotes revealed in media reports. These quotes reveal a range of lower costs for low/moderate-risk buildings and higher costs for high/extreme-risk buildings, usually based on the work for varying levels of rectification.

Firstly, we conservatively applied lower rectification cost data, being AUS$2,500 per dwelling for low/moderate-risk buildings and AUS$20,000 per dwelling for high/extreme-risk buildings.

Secondly, we applied higher costs found in quotes and media reports. These are $15,000 per dwelling for low/moderate-risk buildings and AUS$60,000 per dwelling for high/extreme-risk buildings. These figures are still conservative, based on multiple sighted estimates approaching $100,000 per dwelling.

We have calculated costs for two scenarios for all 629 buildings identified by last October:

  • an average of 75 dwellings per building as per MCC data, and
  • an average of 37 dwellings per building, 50 percent less than MCC data to account for a higher proportion of lower-density developments affected (based on averages in municipalities significantly affected by the crisis such as Port Phillip, Stonington and Moreland).

So how high could the bill be?

Our estimates show Victorian owners who are known to be affected may conservatively face a rectification bill of AUS$250 to $500 million, if industry and government work with them to cap costs in economies-of-scale solutions. The bill may be as high as A$1.6 billion, if an inefficient approach is used and we have a higher proportion of larger buildings affected.

Cladding audits are ongoing. The number of identified affected properties is likely to rise. At the 2019 Building Surveyors’ Conference, the Victorian Building Authority appeared to categorise over 1200 private Victorian buildings as moderately through to extreme risk for combustible cladding.

If this figure is correct, our cost estimates are conservative and will double.

Our estimates do not factor in the apartments yet to be identified or, more broadly, the issues in other states that have also been identified.

Government and industry shun responsibility

To date, the response of the Victorian Government and industry has been to push financial responsibility back onto home owners. A Victorian low-interest loan scheme was launched in October allowing owners to repay amounts over 10 years. It has been reported, however, that no loans had been granted as recently as February.

The Victorian Government’s 27 May budget papers stated that AUS$160 million would be spent on the crisis “on public safety grounds”. This including ongoing assessments of private buildings affected by combustible cladding and 15 evaluation projects to manage and improve rectification outcomes.

As yet no funding has been provided to help owners of private dwellings who bought supposedly compliant properties. While billions in revenue is recouped from stamp duty, owners are being told to rectify a problem for which they were not responsible – all at their own cost.

Many owners simply will not be able to pay. Some individual bills sighted are as much as a quarter of the owner’s property value. On top of this, some insurance premiums have quadrupled.

At the vast costs we have estimated, and based on the chain of events leading to the cladding crisis and the lack of support following, is it reasonable that sole responsibility falls on owners to pay? And will such a move not lead to thousands of costly actions through the courts as owners try to recoup costs?

Government and industry should provide substantial financial support to owners to help them recover from mass failures of policy, regulatory policing and industry practice. The UK government has to the tune of £200 million (AUS$364 million). It is time to support Australian owners in a billion-dollar crisis they were not responsible for creating.

This article originally appeared on The Conversation

The Vola story

Conversation • 0 comments

Add to this conversation

show/hide

Reply

Your email address will not be published.